The winter periods are not usually a time that people think about wood fences unless. An old one appears to blow down through a storm and allows the family pet to escape the backyard.
A well-constructed wood fence should serve at least 20 years. Still, with some approximately manageable modifications to the design, the lifespan of a wood fence can be easily increased. It’s a piece of great news if you are considering a new fence, either out of necessity or just because you want to enhance the elegance and curb appeal of your home.
Whether you are a do-it-yourself designing a fence project or will be having a fence contractors do the work. The following enhancements to your project plans will make your fence not only last longer. Still, they will keep it looking fresh and new for ages.
A Sturdy Frame Obtains a Strong Fence
Start with pressure-treated wood for the posts and framing. Pressure-treated boards are chemically infused and will last significantly prolonged when exposed to moisture and wood-destroying organisms in the soil. Make sure to seal any saw cuts begun to pressure-treated hardwood, especially end-cuts, with a supplementary liquid wood chemical. Try to keep the gap within fence posts to no more than 7′. It will only add an extra two posts per 100′ of the fence and will help to keep the fence from bending between posts.
If your fence has a gate, consider using long posts on each side of the gate and joining a cross brace at the top. It does not only add a beautiful accent to your design, but it holds the posts from weakening due to the weight of the gate.
A Little Bit of Gravel Offers a Huge Exception
When establishing posts in cement, put two or three inches of rocks in the base of the holes to enhance drainage and preserve the bottom of the posts from decay. Remember that you don’t ought to pre-mix the cement. Just pour it in straight, flatten it down, and pour water on the top! It is more a good idea to build the pavement up to one to two inches beyond the level of the ground to hold the posts from getting into contact with the soil. Remember, if the posts rot and break, the fence fails!
Use three cross portions in the framing between posts rather than two, which will significantly improve the strength of your fence. And will also help to limit leaning by joining the posts about a ½ inch deep into the ground. Where each cross-portion attaches to the posts, it locks the cross portions into position. Also, it makes building the fence much easy, mainly if you are working alone.
These can be made quickly with a skill saw. Just make precise cuts calculating 1 ½” in height and use a chisel and hammer to hit the pieces out. Never let your fence boards reach the soil, which will enable them to rot; try to keep them 2″ to 3″ up the ground.
Stainless Steel is the Greatest!
Never use nails, which will work loosened over time. Build your fence with stainless steel fencing bolts, which are readily obtainable at most hardware stores—use 3″ screws for mounting and 1 5/8″ screws for fence panels. Stainless screws are more costly than “coated” screws but will not fail due to corrosion or stain the wood. Use three stainless steel hinges and fixtures for gates. They are a bit more pricey, but they last forever.
Stain, Stain, Stain!
Never paint a fence, which will catch moisture over time and will promote rot. Stain the framing, stain any dents or cuts, and stain the fence beams. A surface decking stain will take out the natural color and texture of the wood and will seal and preserve from moisture and sunlight. The stain will also make your fence serve significantly sustained.
These will be remarkably accurate in Pebble Beach, Carmel, Pacific Grove, and Monterey, where the summertime fog develops mold and mildew increase on exposed redwood fences.
Use a stain with a high density of paraffin (wax) in addition to colors. It is easier to stain the frame with a lather roller before the fence slats remain installed, which guarantees that all surfaces are cover. Try wetting the bottom of each fence board in stain before installing, which is a fast and easy way to seal the base of the boards. Plan on re-staining your fence every three to five years for favorable protection and excellence.
We Custom-Built Fences
We only install Wood Privacy, Chain-link, Gates, Ornamental Iron, Picket, and anything else that has to do with fencing.
Do you want your new fence installed by a company that does 5 different things just…so so? Or do you want a company that has been doing nothing but fencing for 20 years, has an A+ with the BBB, and guarantees their work?
There are lots of companies out there that install fences, do roofing, landscaping, lawn care, tree services, siding – you get the point! They have subcontractors who do many things, but not any of them are doing with expertise. We at Fence Masters only install fences, nothing else.
And our Master Installation Crew is the best around. Professionals who know how to do the job right! All of our repairs or new installations are done with top quality materials by a top-quality team of professionals. Together, our team has over 130 years of fence installation experience.
When you need a reliable fence builder for the projects that requires perimeter security and control to your property, choose The Fence Masters.
We are not the cheapest, and that is not our goal. Our goal is to:
Do it right the first time.
Provide high-quality materials that will last for years to come.
Provide you with prompt, courteous service.